Add punch to muffled snares, reduce the harshness from active pickups, create some wonderful Dub and LoFi sounds...
This filter is a specialist in changing the overall sonic character of a signal with ease. It features two comprehensive controllers and is capable of producing convincing results in no time at all. Whenever a classic shelving filter would be too limited and a fully parametric filter would be too much, the niveau filter is the perfect tool.
Its main function is to change the proportions between high and low frequencies. The principle is quite similar to a pair of scales: Dependent on the gain setting around a variable center frequency, the high frequencies are boosted whereas the low frequencies are attenuated (or vice versa) at the same time.
The center frequency can be shifted continuously between 26 Hz and 2.2 kHz or between 260 Hz and 22 kHz respectively (when the x10 switch is activated). The characteristics of the filter change in the extreme positions of the EQ Gain controller: The fully counter-clockwise setting will give you a low pass filter; fully clockwise position will result in a high pass filter.
We don't host any software files here. The download button will take you to the Plugin Alliance website where you can download the software direct.
Download PluginThis software is suffering from a lack of comments !
If you have time, download it, test it and leave some feedback for others.
Here's 5 more plugins, vsts and aps from Plugin Alliance
The bx_subfilter is a free plugin that borrows from the “Filter” section of its larger counterpart, the bx_subsynth. It’s the perfect plugin for anyone who loves the bx_subsynth’s .....
Schoeps Double MS Decode Double-MS Microphone Setups in Post Production
This plugin is calibrated for the SCHOEPS Double M/S Microphone, but it will also work with any other .....
An EQ processing straightly reveals the sound quality of a software – probably better than any other processing tool. Therefore, the Free Ranger ideally demonstrates the amazing qualities of our Analog .....
L(LEFT channel), R(RIGHT channel), M(MONO sum, mid signal) & S(STEREO-Difference, side signal) - and all this phase-corrected (when needed) and mono-ed out on both speakers of your system. This is .....
bx_cleansweep is the plugin that should go into every mix channel as the first plugin. This way you can filter out any unwanted hi-end and lo-end, and the result is a clean and tight mix.